Indoor Ceiling Suspended Throwing Cage

Our MODEL 4075 INDOOR CEILING SUSPENDED THROWING CAGE is a top quality unit for use in facilities where frequent indoor track and field set-up is required. This product meets all USTF and NCAA requirements for indoor throwing cages. The net shall be constructed of 600lb test (minimum), #72 knotted nylon. The HAMMER THROW DOOR FRAMES SYSTEM is compromised of two vertical frame members hinged at the truss connection point to allow the frames and wing doors to fold as a single unit. Frames are 4 square heavy wall tubing, extended to the floor in the down position to support doors in the proper position for the event. Frames are folded into the stored position by means of ¼ galvanized aircraft cable on each vertical frame using a 3/4HP double drum electric hoist. The net shall be constructed of 600lb test (minimum), #72 knotted nylon. The REAR CAGE FRAME is constructed of 1.9O.D. heavy wall tubing featuring a cross spreader spans the perimeter if the cage to maintain a 5m distance required by the NCAA rule. The frame shall be raised to the overhead storage position by means if six 1/8 galvanized aircraft cables routed through swivel pulleys to a central drive pipe. The drive system is powered by a ¾ HP electric motor. The net shall be constructed of 600lb test (minimum), #72 knotted nylon.